Specifications Product specifications and dimensions

• Item
  Crown & Bridge
• Item Type
  Printable Resin
• Quantity
  1Kg
• Shade
  BL1
• Size
  1 Kg

Catalog Description As seen in our print catalog

An FDA-cleared, biocompatible, and photocurable material intended for manufacturing temporary crown-and-bridge restorations. Performance and strength are the same as conventional acrylic. Fabricating temporary crowns or bridges with this resin requires digital models, a stereolithographic additive printer, and curing light equipment.
Specifications Before Curing:
Viscosity at 25+/-0.5°C: 1000 cps and 2000 cps
Density: 1.05 Gm./cm³ and 1.2 Gm./cm³
Specifications After Curing:
Density: 1.15 Gm./cm³ and 1.25 Gm./cm³
Flexural strength: 50 MPa
Degree of conversion: 70%